RFC 4456 - BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP) (BGP Route Reflection: Un'alternativa al Full Mesh Internal BGP)
- Stato: Draft Standard
- Pubblicato: April 2006
- Stream: IETF
- Sostituisce: RFC1966, RFC2796
- Errata: Nessun errata
Status of This Memo (Stato di questo documento)
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Questo documento specifica un protocollo standards track Internet per la comunità Internet, e richiede discussioni e suggerimenti per miglioramenti. Si prega di fare riferimento all'edizione corrente degli "Internet Official Protocol Standards" (STD 1) per lo stato di standardizzazione e lo stato di questo protocollo. La distribuzione di questo memorandum è illimitata.
Copyright Notice (Avviso di Copyright)
Copyright (C) The Internet Society (2006).
Abstract (Riassunto)
The Border Gateway Protocol (BGP) is an inter-autonomous system routing protocol designed for TCP/IP internets. Typically, all BGP speakers within a single AS must be fully meshed so that any external routing information must be re-distributed to all other routers within that Autonomous System (AS). This represents a serious scaling problem that has been well documented with several alternatives proposed.
Il Border Gateway Protocol (BGP) è un protocollo di routing tra sistemi autonomi progettato per le reti TCP/IP. Tipicamente, tutti gli speaker BGP all'interno di un singolo AS devono essere completamente connessi (fully meshed) in modo che qualsiasi informazione di routing esterna possa essere ridistribuita a tutti gli altri router all'interno di quel Sistema Autonomo (AS). Questo rappresenta un serio problema di scalabilità che è stato ben documentato con diverse alternative proposte.
This document describes the use and design of a method known as "route reflection" to alleviate the need for "full mesh" Internal BGP (IBGP).
Questo documento descrive l'uso e la progettazione di un metodo noto come "route reflection" per alleviare la necessità di un Internal BGP (IBGP) "full mesh".
This document obsoletes RFC 2796 and RFC 1966.
Questo documento rende obsoleti RFC 2796 e RFC 1966.
Table of Contents (Indice)
- 1. Introduction (Introduzione)
- 2. Specification of Requirements (Specifica dei Requisiti)
- 3. Design Criteria (Criteri di Progettazione)
- 4. Route Reflection (Route Reflection)
- 5. Terminology and Concepts (Terminologia e Concetti)
- 6. Operation (Operazione)
- 7. Redundant RRs (RR Ridondanti)
- 8. Avoiding Routing Information Loops (Evitare Loop di Informazioni di Routing)
- 9. Impact on Route Selection (Impatto sulla Selezione della Rotta)
- 10. Implementation Considerations (Considerazioni sull'Implementazione)
- 11. Configuration and Deployment Considerations (Considerazioni sulla Configurazione e Distribuzione)
- 12. Security Considerations (Considerazioni sulla Sicurezza)
- 13. Acknowledgements (Riconoscimenti)
- 14. References (Riferimenti)
- Appendix A: Comparison with RFC 2796 (Appendice A: Confronto con RFC 2796)
- Appendix B: Comparison with RFC 1966 (Appendice B: Confronto con RFC 1966)