RFC 6550 - 低功耗有损网络的 IPv6 路由协议 (RPL)
- 状态: Proposed Standard
- 发布日期: March 2012
- Stream: IETF
- 勘误: 无勘误
摘要
本文档定义了低功耗有损网络的 IPv6 路由协议 (RPL), 这是专为物联网设备设计的路由协议.
目录
- 1. 引言 (Introduction)
- 2. 术语 (Terminology)
- 3. 协议概述 (Protocol Overview)
- 3.1. 拓扑 (Topologies)
- 3.2. 向上路由和 DODAG 构造 (Upward Routes and DODAG Construction)
- 3.2.1. 目标函数 (Objective Function, OF)
- 3.2.2. DODAG 修复 (DODAG Repair)
- 3.2.3. 安全 (Security)
- 3.2.4. Grounded 和 Floating DODAG (Grounded and Floating DODAGs)
- 3.2.5. 本地 DODAG (Local DODAGs)
- 3.2.6. 管理偏好 (Administrative Preference)
- 3.2.7. 数据路径验证和环路检测 (Data-Path Validation and Loop Detection)
- 3.2.8. 分布式算法运行 (Distributed Algorithm Operation)
- 3.3. 向下路由和目的地通告 (Downward Routes and Destination Advertisement)
- 3.4. 本地 DODAG 路由发现 (Local DODAGs Route Discovery)
- 3.5. Rank 属性 (Rank Properties)
- 3.6. RPL 使用的路由度量和约束 (Routing Metrics and Constraints Used by RPL)
- 3.7. 环路避免 (Loop Avoidance)
- 4. RPL 支持的流量流 (Traffic Flows Supported by RPL)
- 5. RPL 实例 (RPL Instance)
- 6. ICMPv6 RPL 控制消息 (ICMPv6 RPL Control Message)
- 6.1. RPL 安全字段 (RPL Security Fields)
- 6.2. DODAG 信息请求 (DODAG Information Solicitation, DIS)
- 6.3. DODAG 信息对象 (DODAG Information Object, DIO)
- 6.4. 目的地通告对象 (Destination Advertisement Object, DAO)
- 6.5. 目的地通告对象确认 (Destination Advertisement Object Acknowledgement, DAO-ACK)
- 6.6. 一致性检查 (Consistency Check, CC)
- 6.7. RPL 控制消息选项 (RPL Control Message Options)
- 6.7.1. RPL 控制消息选项通用格式 (RPL Control Message Option Generic Format)
- 6.7.2. Pad1
- 6.7.3. PadN
- 6.7.4. DAG 度量容器 (DAG Metric Container)
- 6.7.5. 路由信息 (Route Information)
- 6.7.6. DODAG 配置 (DODAG Configuration)
- 6.7.7. RPL Target
- 6.7.8. 传输信息 (Transit Information)
- 6.7.9. 请求信息 (Solicited Information)
- 6.7.10. 前缀信息 (Prefix Information)
- 6.7.11. RPL Target Descriptor
- 7. 序列计数器 (Sequence Counters)
- 8. Upward 路由 (Upward Routes)
- 8.1. DIO 基本规则 (DIO Base Rules)
- 8.2. Upward 路由发现和维护 (Upward Route Discovery and Maintenance)
- 8.3. DIO 传输 (DIO Transmission)
- 8.4. DODAG 选择 (DODAG Selection)
- 8.5. 作为叶节点运行 (Operation as a Leaf Node)
- 8.6. 管理 Rank (Administrative Rank)
- 9. Downward 路由 (Downward Routes)
- 9.1. 目的地通告父节点 (Destination Advertisement Parents)
- 9.2. Downward 路由发现和维护 (Downward Route Discovery and Maintenance)
- 9.3. DAO 基本规则 (DAO Base Rules)
- 9.4. DAO 消息结构 (Structure of DAO Messages)
- 9.5. DAO 传输调度 (DAO Transmission Scheduling)
- 9.6. 触发 DAO 消息 (Triggering DAO Messages)
- 9.7. Non-Storing 模式 (Non-Storing Mode)
- 9.8. Storing 模式 (Storing Mode)
- 9.9. Path Control
- 9.10. 组播目的地通告消息 (Multicast Destination Advertisement Messages)
- 10. 安全机制 (Security Mechanisms)
- 10.1. 安全概述 (Security Overview)
- 10.2. 加入安全网络 (Joining a Secure Network)
- 10.3. 安装密钥 (Installing Keys)
- 10.4. 一致性检查 (Consistency Checks)
- 10.5. 计数器 (Counters)
- 10.6. 传出分组传输 (Transmission of Outgoing Packets)
- 10.7. 传入分组接收 (Reception of Incoming Packets)
- 10.8. 完整性和机密性覆盖范围 (Coverage of Integrity and Confidentiality)
- 10.9. 密码学运行模式 (Cryptographic Mode of Operation)
- 11. 分组转发和环路避免/检测 (Packet Forwarding and Loop Avoidance/Detection)
- 12. 组播操作 (Multicast Operation)
- 13. 路由邻接维护 (Maintenance of Routing Adjacency)
- 14. Objective Function 指南 (Guidelines for Objective Functions)
- 15. 与邻居发现互操作的建议 (Suggestions for Interoperation with Neighbor Discovery)
- 16. 可互操作实现的要求摘要 (Summary of Requirements for Interoperable Implementations)
- 16.1. 通用要求 (Common Requirements)
- 16.2. 作为 RPL 叶节点运行 (仅叶节点) (Operation as a RPL Leaf Node (Only))
- 16.3. 作为 RPL 路由器运行 (Operation as a RPL Router)
- 16.4. 留待未来规范处理的事项 (Items for Future Specification)
- 17. RPL 常量和变量 (RPL Constants and Variables)
- 18. 可管理性考虑 (Manageability Considerations)
- 18.1. 简介 (Introduction)
- 18.2. 配置管理 (Configuration Management)
- 18.2.1. 初始化模式 (Initialization Mode)
- 18.2.2. DIO 和 DAO 基本消息及选项配置 (DIO and DAO Base Message and Options Configuration)
- 18.2.3. LLN 中每个路由器都要配置的协议参数 (Protocol Parameters to Be Configured on Every Router in the LLN)
- 18.2.4. LLN 中每个非 DODAG 根路由器都要配置的协议参数 (Protocol Parameters to Be Configured on Every Non-DODAG-Root Router in the LLN)
- 18.2.5. DODAG 根上要配置的参数 (Parameters to Be Configured on the DODAG Root)
- 18.2.6. 与基于 DAO 的机制相关的 RPL 参数配置 (Configuration of RPL Parameters Related to DAO-Based Mechanisms)
- 18.2.7. 与安全机制相关的 RPL 参数配置 (Configuration of RPL Parameters Related to Security Mechanisms)
- 18.2.8. 默认值 (Default Values)
- 18.3. RPL 运行监控 (Monitoring of RPL Operation)
- 18.4. RPL 数据结构监控 (Monitoring of the RPL Data Structures)
- 18.5. 故障管理 (Fault Management)
- 18.6. 策略 (Policy)
- 18.7. 故障隔离 (Fault Isolation)
- 18.8. 对其他协议的影响 (Impact on Other Protocols)
- 18.9. 性能管理 (Performance Management)
- 18.10. 诊断 (Diagnostics)
- 19. 安全考虑 (Security Considerations)
- 20. IANA 考虑 (IANA Considerations)
- 20.1. RPL 控制消息 (RPL Control Message)
- 20.2. RPL Control Codes 新注册表 (New Registry for RPL Control Codes)
- 20.3. Mode of Operation (MOP) 新注册表 (New Registry for the Mode of Operation (MOP))
- 20.4. RPL 控制消息选项 (RPL Control Message Options)
- 20.5. Objective Code Point (OCP) 注册表 (Objective Code Point (OCP) Registry)
- 20.6. Security Section Algorithm 新注册表 (New Registry for the Security Section Algorithm)
- 20.7. Security Section Flags 新注册表 (New Registry for the Security Section Flags)
- 20.8. 每个 KIM 的 Security Level 新注册表 (New Registry for Per-KIM Security Levels)
- 20.9. DODAG 信息请求 (DIS) Flags 新注册表 (New Registry for DODAG Informational Solicitation (DIS) Flags)
- 20.10. DODAG Information Object (DIO) Flags 新注册表 (New Registry for the DODAG Information Object (DIO) Flags)
- 20.11. Destination Advertisement Object (DAO) Flags 新注册表 (New Registry for the Destination Advertisement Object (DAO) Flags)
- 20.12. Destination Advertisement Object (DAO) Acknowledgement Flags 新注册表 (New Registry for the Destination Advertisement Object (DAO) Acknowledgement Flags)
- 20.13. Consistency Check (CC) Flags 新注册表 (New Registry for the Consistency Check (CC) Flags)
- 20.14. DODAG Configuration Option Flags 新注册表 (New Registry for the DODAG Configuration Option Flags)
- 20.15. RPL Target Option Flags 新注册表 (New Registry for the RPL Target Option Flags)
- 20.16. Transit Information Option Flags 新注册表 (New Registry for the Transit Information Option Flags)
- 20.17. Solicited Information Option Flags 新注册表 (New Registry for the Solicited Information Option Flags)
- 20.18. ICMPv6: Source Routing Header 错误 (Error in Source Routing Header)
- 20.19. 链路本地作用域组播地址 (Link-Local Scope Multicast Address)
- 21. 致谢 (Acknowledgements)
- 22. 贡献者 (Contributors)
- 23. 参考文献 (References)
- 附录 A. 示例操作 (Example Operation)
- A.1. 带节点自有前缀的 Storing 模式示例操作 (Example Operation in Storing Mode with Node-Owned Prefixes)
- A.2. 带子网范围前缀的 Storing 模式示例操作 (Example Operation in Storing Mode with Subnet-Wide Prefix)
- A.3. 带节点自有前缀的 Non-Storing 模式示例操作 (Example Operation in Non-Storing Mode with Node-Owned Prefixes)
- A.4. 带子网范围前缀的 Non-Storing 模式示例操作 (Example Operation in Non-Storing Mode with Subnet-Wide Prefix)
- A.5. 外部前缀示例 (Example with External Prefixes)
- 作者地址 (Authors' Addresses)
相关资源
- 官方文本:
https://www.rfc-editor.org/rfc/rfc6550.txt - 官方页面:
https://datatracker.ietf.org/doc/html/rfc6550