7. SCIM Device Extensions
Cette section conserve le texte RFC des SCIM device schema extensions, y compris Device and EndpointApp resource types, BLE, DPP, Ethernet MAB, FDO, Zigbee, endpointAppsExt, JSON Schema, OpenAPI, IANA registrations et security considerations.
7. SCIM Device Extensions
SCIM provides various extension schemas and their attributes, along
with JSON representations and example objects. The core schema is
extended with a new resource type, Device. No schemaExtensions list
is specified in that definition. Instead, IANA registry entries have
been created, where all values for "required" are set to false. All
extensions to the device schema MUST be registered via IANA, as
described in Section 9.2. The schemas below demonstrate how this
model is to work. All the SCIM server-related schema URIs are valid
only with Device resource types.
7.1. Bluetooth Low Energy (BLE) Extension
This schema extends the device schema to represent the devices
supporting BLE. The extension is identified using the following
schema URI:
urn:ietf:params:scim:schemas:extension:ble:2.0:Device
The attributes are as follows.
7.1.1. Singular Attributes
deviceMacAddress: A string value that represents a public MAC
address assigned by the manufacturer. It is a unique 48-bit
value. It is required, case insensitive, mutable, and returned by
default. The ECMA regular expression pattern [ECMA] is the
following:
^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}$
isRandom: A boolean flag. If false, the device is using a public
MAC address. If true, the device uses a random address. If an
Identifying Resolving Key (IRK) is present, the address represents
a resolvable private address. Otherwise, the address is assumed
to be a random static address. Non-resolvable private addresses
are not supported by this specification. This attribute is not
required. It is mutable and is returned by default. The default
value is false. See Volume 6, Part B, Section 1.3 of [BLE54] for
more information about different address types.
separateBroadcastAddress: When present, this string represents an
address used for broadcasts/advertisements. This value MUST NOT
be set when an IRK is provided. Its form is the same as
deviceMacAddress. It is not required. It is multivalued,
mutable, and returned by default.
irk: A string value that specifies the IRK, which is unique to each
device. It is used to resolve a private random address. It
should only be provisioned when isRandom is true. It is mutable
and never returned. For more information about the use of the
IRK, see Volume 1, Part A, Section 5.4.5 of [BLE54].
mobility: A boolean attribute to enable BLE device mobility. If set
to true, the device could be expected to move within a network of
Access Points (APs). For example, if a BLE device is connected
with AP-1 and moves out of range but comes in range of AP-2, it
will be disconnected with AP-1 and connected with AP-2. It is
returned by default and mutable.
7.1.2. Multivalued Attributes
versionSupport: A multivalued set of strings that specifies the BLE
versions supported by the device in the form of an array, for
example, ["4.1", "4.2", "5.0", "5.1", "5.2", "5.3", "5.4"]. It is
required, mutable, and returned by default.
pairingMethods: A multivalued set of strings that specifies pairing
methods associated with the BLE device. The pairing methods may
require subattributes such as key/password for the device pairing
process. To enable the scalability of pairing methods in the
future, they are represented as extensions to incorporate various
attributes that are part of the respective pairing process.
Pairing method extensions are nested inside the BLE extension. It
is required, case sensitive, mutable, and returned by default.
7.1.3. BLE Pairing Method Extensions
The details on pairing methods and their associated attributes are in
Volume 1, Part A, Section 5.2.4 of [BLE54]. This memo defines
extensions for four pairing methods that are nested inside the BLE
extension schema. Each extension contains the common attributes in
Section 2.1. These extensions are as follows:
pairingNull extension: Identified using the following schema URI:
urn:ietf:params:scim:schemas:extension:pairingNull:2.0:Device
pairingNull does not have any attribute. It allows pairing for
BLE devices that do not require a pairing method.
pairingJustWorks extension: Identified using the following schema
URI:
urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0:Device
The Just Works pairing method does not require a key to pair
devices. For completeness, the key attribute is included and is
set to 'null'. The key attribute is required, immutable, and
returned by default.
pairingPassKey extension: Identified using the following schema URI:
urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:Device
The passkey pairing method requires a 6-digit key to pair devices.
This extension has one singular integer attribute, "key", which is
required, mutable, and returned by default. The key pattern is as
follows:
^[0-9]{6}$
pairingOOB extension: Identified using the following schema URI:
urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device
The out-of-band (OOB) pairing method includes three singular
attributes: key, randomNumber, and confirmationNumber.
key:
A string value that is required and received from out-of-band
sources such as Near Field Communication (NFC). It is case
sensitive, mutable, and returned by default.
randomNumber:
An integer that represents a nonce added to the key. It is a
required attribute. It is mutable and returned by default.
confirmationNumber:
An integer that some solutions require in a RESTful message
exchange (where RESTful refers to the Representational State
Transfer (REST) architecture). It is not required. It is
mutable and returned by default if it exists.
+==================+=======+===+=======+=========+========+========+
| Attribute | Multi |Req| Case | Mutable | Return | Unique |
| | Value | | Exact | | | |
+==================+=======+===+=======+=========+========+========+
| deviceMacAddress | F |T | F | RW | Def | Manuf |
+------------------+-------+---+-------+---------+--------+--------+
| isRandom | F |F | F | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
| sepBroadcastAdd | T |F | F | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
| irk | F |F | F | WO | Nev | Manuf |
+------------------+-------+---+-------+---------+--------+--------+
| versionSupport | T |T | F | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
| mobility | F |F | F | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
| pairingMethods | T |T | T | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
Table 3: Characteristics of BLE Extension Schema Attributes
Legend: sepBroadcastAdd = separateBroadcastAddress, Req = Required,
T = True, F = False, RW = ReadWrite, WO = WriteOnly,
Def = Default, Nev = Never, Manuf = Manufacturer
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "BLE Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
"versionSupport": ["5.4"],
"deviceMacAddress": "2C:54:91:88:C9:E2",
"isRandom": false,
"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
22:12"],
"mobility": true,
"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
pairingPassKey:2.0:Device"],
"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
Device" : {
"key": 123456
}
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 5: BLE Example
In the above example, the pairing method is "pairingPassKey", which
implies that this BLE device pairs using only a passkey. In another
example below, the pairing method is "pairingOOB", denoting that this
BLE device uses the out-of-band pairing method.
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "BLE Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
"versionSupport": ["5.4"],
"deviceMacAddress": "2C:54:91:88:C9:E2",
"isRandom": false,
"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
22:12"],
"mobility": true,
"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
pairingOOB:2.0:Device"],
"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": {
"key": "TheKeyvalueRetrievedFromOOB",
"randomNumber": 238796813516896
}
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 6: BLE with pairingOOB
However, a device can have more than one pairing method. Support for
multiple pairing methods is also provided by the multivalued
attribute pairingMethods. In the example below, the BLE device can
pair with both passkey and OOB pairing methods.
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "BLE Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
"versionSupport": ["5.4"],
"deviceMacAddress": "2C:54:91:88:C9:E2",
"isRandom": false,
"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
22:12"],
"mobility": true,
"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
pairingPassKey:2.0:Device",
"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:\
Device"],
"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
Device" : {
"key": 123456
},
"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": {
"key": "TheKeyvalueRetrievedFromOOB",
"randomNumber": 238796813516896
}
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 7: BLE Pairing with Both Passkey and OOB
7.2. Wi-Fi Easy Connect Extension
This section describes a schema that extends the device schema to
enable Wi-Fi Easy Connect (otherwise known as Device Provisioning
Protocol (DPP)). Throughout this specification, we use the term
"DPP". The extension is identified using the following schema URI:
urn:ietf:params:scim:schemas:extension:dpp:2.0:Device
The attributes in this extension are adopted from [DPP2]. The
attributes are as follows.
7.2.1. Singular Attributes
dppVersion: An integer that represents the version of DPP the device
supports. This attribute is required, case insensitive, mutable,
and returned by default.
bootstrapKey: A string value representing an Elliptic Curve Diffie-
Hellman (ECDH) public key. The base64-encoded lengths for P-256,
P-384, and P-521 are 80, 96, and 120 characters. This attribute
is required, case sensitive, write only, and never returned.
deviceMacAddress: A MAC address stored as a string. It is a unique
48-bit value. This attribute is optional, case insensitive,
mutable, and returned by default. Its form is identical to that
of the deviceMacAddress for BLE devices.
serialNumber: An alphanumeric serial number stored as a string. It
may also be passed as bootstrapping information. This attribute
is optional, case insensitive, mutable, and returned by default.
7.2.2. Multivalued Attributes
bootstrappingMethod: One or more strings of all the bootstrapping
methods available on the enrollee device, for example, [QR, NFC].
This attribute is optional, case insensitive, mutable, and
returned by default.
classChannel: One or more strings representing the global operating
class and channel shared as bootstrapping information. It is
formatted as class/channel, for example, ['81/1','115/36']. This
attribute is optional, case insensitive, mutable, and returned by
default.
+=====================+=====+===+=====+=========+========+========+
| Attribute |Multi|Req|Case | Mutable | Return | Unique |
| |Value| |Exact| | | |
+=====================+=====+===+=====+=========+========+========+
| dppVersion |F |T |F | RW | Def | None |
+---------------------+-----+---+-----+---------+--------+--------+
| bootstrapKey |F |T |T | WO | Nev | None |
+---------------------+-----+---+-----+---------+--------+--------+
| deviceMacAddress |F |F |F | RW | Def | Manuf |
+---------------------+-----+---+-----+---------+--------+--------+
| serialNumber |F |F |F | RW | Def | None |
+---------------------+-----+---+-----+---------+--------+--------+
| bootstrappingMethod |T |F |F | RW | Def | None |
+---------------------+-----+---+-----+---------+--------+--------+
| classChannel |T |F |F | RW | Def | None |
+---------------------+-----+---+-----+---------+--------+--------+
Table 4: Characteristics of DPP Extension Schema Attributes
Legend: Req = Required, T = True, F = False, RW = ReadWrite,
WO = WriteOnly, Def = Default, Nev = Never,
Manuf = Manufacturer
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:dpp:2.0:\
Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "WiFi Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:dpp:2.0:Device" : {
"dppVersion": 2,
"bootstrappingMethod": ["QR"],
"bootstrapKey": "\
MDkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDIgADURzxmttZoIRIPWGoQMV00XHWCAQIhXru\
VWOz0NjlkIA=",
"deviceMacAddress": "2C:54:91:88:C9:F2",
"classChannel": ["81/1", "115/36"],
"serialNumber": "4774LH2b4044"
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-\
4109-8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 8: DPP Example
7.3. Ethernet MAB Extension
This extension enables a legacy means of (very) weak authentication,
known as MAC Authenticated Bypass (MAB), that is supported in many
wired ethernet solutions. If the MAC address is known, then the
device may be permitted (perhaps limited) access. The extension is
identified by the following URI:
urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device
Note that this method is not likely to work properly with MAC address
randomization.
7.3.1. Single Attribute
This extension has a singular attribute:
deviceMacAddress: This is the Ethernet address to be provisioned
onto the network. It takes the identical form as found in the BLE
extension.
+==================+=======+===+=======+=========+========+========+
| Attribute | Multi |Req| Case | Mutable | Return | Unique |
| | Value | | Exact | | | |
+==================+=======+===+=======+=========+========+========+
| deviceMacAddress | F |T | F | RW | Def | None |
+------------------+-------+---+-------+---------+--------+--------+
Table 5: Characteristics of MAB Extension Schema Attributes
Legend: Req = Required, T = True, F = False, RW = ReadWrite,
Def = Default
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device\
"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "Some random Ethernet Device",
"active": true,
"urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device" \
: {
"deviceMacAddress": "2C:54:91:88:C9:E2"
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 9: MAB Example
7.4. FIDO Device Onboard Extension
This extension specifies a voucher to be used by the FDO Device
Onboard (FDO) protocols [FDO11] to complete a trusted transfer of
ownership and control of the device to the environment. The SCIM
server MUST know how to process the voucher, either directly or by
forwarding it along to an owner process as defined in the FDO
specification. The extension is identified using the following
schema URI:
urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0:Device
7.4.1. Single Attribute
This extension has a singular attribute:
fdoVoucher: The voucher is formatted as a PEM-encoded object in
accordance with [FDO11].
+============+=======+=====+=======+=========+========+========+
| Attribute | Multi | Req | Case | Mutable | Return | Unique |
| | Value | | Exact | | | |
+============+=======+=====+=======+=========+========+========+
| fdoVoucher | F | T | F | WO | Nev | None |
+------------+-------+-----+-------+---------+--------+--------+
Table 6: Characteristics of FDO Extension Schema Attributes
Legend: Req = Required, T = True, F = False, WO = WriteOnly,
Nev = Never
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0\
:Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "Some random Ethernet Device",
"active": true,
"urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0:\
Device" : {
"fdoVoucher": "{... voucher ...}"
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 10: FDO Example
7.5. Zigbee Extension
This section describes a schema that extends the device schema to
enable the provisioning of Zigbee devices [Zigbee]. The extension is
identified using the following schema URI:
urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device
It has one singular attribute and one multivalued attribute. The
attributes are as follows.
7.5.1. Singular Attribute
deviceEui64Address: A 64-bit Extended Unique Identifier (EUI-64)
device address stored as string. This attribute is required, case
insensitive, mutable, and returned by default. It takes the same
form as the deviceMacAddress in the BLE extension.
7.5.2. Multivalued Attribute
versionSupport: One or more strings of all the Zigbee versions
supported by the device, for example, [3.0]. This attribute is
required, case insensitive, mutable, and returned by default.
+====================+=====+===+=======+=========+========+========+
| Attribute |Multi|Req| Case | Mutable | Return | Unique |
| |Value| | Exact | | | |
+====================+=====+===+=======+=========+========+========+
| deviceEui64Address |F |T | F | RW | Def | None |
+--------------------+-----+---+-------+---------+--------+--------+
| versionSupport |T |T | F | RW | Def | None |
+--------------------+-----+---+-------+---------+--------+--------+
Table 7: Characteristics of Zigbee Extension Schema Attributes
Legend: Req = Required, T = True, F = False, RW = ReadWrite,
Def = Default
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "Zigbee Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device" : {
"versionSupport": ["3.0"],
"deviceEui64Address": "50:32:5F:FF:FE:E7:67:28"
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 11: Zigbee Example
7.6. The Endpoint Applications Extension Schema
Sometimes non-IP devices such as those using BLE or Zigbee require an
application gateway interface to manage them.
endpointAppsExt provides the list of applications that connect to an
enterprise gateway. endpointAppsExt has one multivalued attribute and
two singular attributes. The extension is identified using the
following schema URI:
urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:Device
7.6.1. Singular Attributes
deviceControlEnterpriseEndpoint: A string representing the URL of
the enterprise endpoint to reach the enterprise gateway. When the
enterprise receives the SCIM object from the onboarding
application, it adds this attribute to it and sends it back as a
response to the onboarding application. This attribute is
required, case sensitive, read-only, and returned by default. The
uniqueness is enforced by the enterprise.
telemetryEnterpriseEndpoint: A string representing a URL of the
enterprise endpoint to reach an enterprise gateway for telemetry.
When the enterprise receives the SCIM object from the onboarding
application, it adds this attribute to it and sends it back as a
response to the onboarding application. This attribute is
optional, case sensitive, read-only, and returned by default. The
uniqueness is enforced by the enterprise. This attribute is
populated when the enterprise provides a telemetry endpoint (e.g.,
hosted by the enterprise gateway). If a telemetry service is not
known by the SCIM server, the attribute will not be returned. In
such cases, if the application requires telemetry, separate
arrangements must be made.
7.6.2. Multivalued Attribute
applications: A multivalued attribute of one or more complex
attributes that represent a list of endpoint applications, i.e.,
deviceControl and telemetry. Each entry in the list comprises two
attributes including "value" and "$ref".
value: A string containing the identifier of the endpoint
application formatted as a Universally Unique Identifier (UUID).
It is the same as the common attribute "$id" of the resource
EndpointApp. It is read/write, required, case insensitive, and
returned by default.
$ref: A reference to the respective EndpointApp resource object
stored in the SCIM server. It is readOnly, required, case
sensitive, and returned by default.
+====================+=====+===+=======+=========+========+========+
| Attribute |Multi|Req| Case | Mutable | Return | Unique |
| |Value| | Exact | | | |
+====================+=====+===+=======+=========+========+========+
| devContEntEndpoint |F |T | T | RO | Def | Ent |
+--------------------+-----+---+-------+---------+--------+--------+
| telEntEndpoint |F |F | T | RO | Def | Ent |
+--------------------+-----+---+-------+---------+--------+--------+
| applications |T |T | F | RW | Def | None |
+--------------------+-----+---+-------+---------+--------+--------+
| value |F |T | F | RW | Def | None |
+--------------------+-----+---+-------+---------+--------+--------+
| $ref |F |T | T | RO | Def | None |
+--------------------+-----+---+-------+---------+--------+--------+
Table 8: Characteristics of endpointAppsExt Extension Schema
Attributes
Legend: devContEntEndpoint = deviceControlEnterpriseEndpoint,
telEntEndpoint = telemetryEnterpriseEndpoint,
Req = Required, T = True, F = False, RO = ReadOnly,
RW = ReadWrite, Ent = Enterprise, Def = Default
Example:
<CODE BEGINS>
{
"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device",
"urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:\
Device"],
"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
"displayName": "BLE Heart Monitor",
"active": true,
"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
"versionSupport": ["5.4"],
"deviceMacAddress": "2C:54:91:88:C9:E2",
"isRandom": false,
"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
22:12"],
"mobility": false,
"pairingMethods": [
"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
Device"],
"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
Device" : {
"key": 123456
}
},
"urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:Device\
": {
"applications": [
{
"value" : "e9e30dba-f08f-4109-8486-d5c6a3316212",
"$ref" : "https://example.com/v2/EndpointApps/e9e30dba-f08f-\
4109-8486-d5c6a3316212"
},
{
"value" : "e9e30dba-f08f-4109-8486-d5c6a3316333",
"$ref" : "https://example.com/v2/EndpointApps/e9e30dba-f08f-\
4109-8486-d5c6a3316333"
}
],
"deviceControlEnterpriseEndpoint": "https://example.com/\
device_control_app_endpoint/",
"telemetryEnterpriseEndpoint": "mqtts://example.com/\
telemetry_app_endpoint/"
},
"meta": {
"resourceType": "Device",
"created": "2022-01-23T04:56:22Z",
"lastModified": "2022-05-13T04:42:34Z",
"version": "W\/\"a330bc54f0671c9\"",
"location": "https://example.com/v2/Devices/e9e30dba-f08f-4109-\
8486-d5c6a3316111"
}
}
<CODE ENDS>
Figure 12: Endpoint Applications Extension Example
The schema for the endpointAppsExt extension along with BLE extension
is presented in JSON format in Appendix A.9, while the OpenAPI
representation is provided in Appendix B.8.