RFC 4604: Using IGMPv3 and MLDv2 for Source-Specific Multicast
- Status: Proposed Standard
- Veröffentlicht: August 2006
- Stream: IETF
- Aktualisiert: RFC3376, RFC3810
- Errata: Keine Errata
Status of This Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Dieses Dokument spezifiziert ein Internet-Standards-Track-Protokoll für die Internet-Community und bittet um Diskussionen und Verbesserungsvorschläge. Bitte beachten Sie die aktuelle Ausgabe der "Internet Official Protocol Standards" (STD 1) bezüglich des Standardisierungsstatus und des Status dieses Protokolls. Die Verbreitung dieses Memos ist unbegrenzt.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The Internet Group Management Protocol Version 3 (IGMPv3) and the Multicast Listener Discovery Protocol Version 2 (MLDv2) are protocols that allow a host to inform its neighboring routers of its desire to receive IPv4 and IPv6 multicast transmissions, respectively. Source-specific multicast (SSM) is a form of multicast in which a receiver is required to specify both the network-layer address of the source and the multicast destination address in order to receive the multicast transmission. This document defines the notion of an "SSM-aware" router and host, and clarifies and (in some cases) modifies the behavior of IGMPv3 and MLDv2 on SSM-aware routers and hosts to accommodate source-specific multicast. This document updates the IGMPv3 and MLDv2 specifications. Das Internet Group Management Protocol Version 3 (IGMPv3) und das Multicast Listener Discovery Protocol Version 2 (MLDv2) sind Protokolle, die es einem Host ermöglichen, seine benachbarten Router über seinen Wunsch zu informieren, IPv4- bzw. IPv6-Multicast-Übertragungen zu empfangen. Source-Specific Multicast (SSM) ist eine Form von Multicast, bei der ein Empfänger sowohl die Netzwerkschichtadresse der Quelle als auch die Multicast-Zieladresse angeben muss, um die Multicast-Übertragung zu empfangen. Dieses Dokument definiert den Begriff eines "SSM-fähigen" Routers und Hosts und klärt und modifiziert (in einigen Fällen) das Verhalten von IGMPv3 und MLDv2 auf SSM-fähigen Routern und Hosts, um quellenspezifisches Multicast zu unterstützen. Dieses Dokument aktualisiert die IGMPv3- und MLDv2-Spezifikationen.