8. IANA 考虑事项
新值 "ccm" 已在 IANA 的 "rtcp-fb" 属性值注册表中注册. 发布时该注册表位于: http://www.iana.org/assignments/sdp-parameters
- 值名称 (Value name): ccm
- 长名称 (Long Name): 编解码器控制命令和指示 (Codec Control Commands and Indications)
- 引用 (Reference): RFC 5104
新的 "Codec Control Messages" 注册表已创建, 用于保存 "ccm" 参数. 发布时该注册表位于: http://www.iana.org/assignments/sdp-parameters
该注册表中的新注册遵循 [RFC2434] 定义的 "Specification required" 策略. 此外, 注册还需要指出任何额外的 RTCP 反馈类型, 例如 "nack" 和 "ack".
该注册表的初始内容为以下值:
-
值名称 (Value name): fir
- 长名称 (Long name): 完全帧内请求命令 (Full Intra Request Command)
- 可与其一起使用 (Usable with): ccm
- 引用 (Reference): RFC 5104
-
值名称 (Value name): tmmbr
- 长名称 (Long name): 临时最大媒体流比特率 (Temporary Maximum Media Stream Bit Rate)
- 可与其一起使用 (Usable with): ccm
- 引用 (Reference): RFC 5104
-
值名称 (Value name): tstr
- 长名称 (Long name): 时空权衡 (Temporal Spatial Trade Off)
- 可与其一起使用 (Usable with): ccm
- 引用 (Reference): RFC 5104
-
值名称 (Value name): vbcm
- 长名称 (Long name): H.271 视频后向信道消息 (H.271 video back channel messages)
- 可与其一起使用 (Usable with): ccm
- 引用 (Reference): RFC 5104
以下值已作为 FMT 值注册到 "FMT Values for RTPFB Payload Types" 注册表中. 发布时该注册表位于: http://www.iana.org/assignments/rtp-parameters
RTPFB 范围
| 名称 (Name) | 长名称 (Long Name) | 值 (Value) | 引用 (Reference) |
|---|---|---|---|
| 保留 (Reserved) | 2 | [RFC5104] | |
| TMMBR | 临时最大媒体流比特率请求 (Temporary Maximum Media Stream Bit Rate Request) | 3 | [RFC5104] |
| TMMBN | 临时最大媒体流比特率通知 (Temporary Maximum Media Stream Bit Rate Notification) | 4 | [RFC5104] |
以下值已作为 FMT 值注册到 "FMT Values for PSFB Payload Types" 注册表中. 发布时该注册表位于: http://www.iana.org/assignments/rtp-parameters
PSFB 范围
| 名称 (Name) | 长名称 (Long Name) | 值 (Value) | 引用 (Reference) |
|---|---|---|---|
| FIR | 完全帧内请求命令 (Full Intra Request Command) | 4 | [RFC5104] |
| TSTR | 时空权衡请求 (Temporal-Spatial Trade-off Request) | 5 | [RFC5104] |
| TSTN | 时空权衡通知 (Temporal-Spatial Trade-off Notification) | 6 | [RFC5104] |
| VBCM | 视频后向信道消息 (Video Back Channel Message) | 7 | [RFC5104] |