11.1. Constructing Inclusive Multicast Ethernet Tag Route (Costruzione della route Inclusive Multicast Ethernet Tag)
11.1. Constructing Inclusive Multicast Ethernet Tag Route (Costruzione della route Inclusive Multicast Ethernet Tag)
Ogni PE che partecipa a un'istanza EVPN DEVE annunciare una o più route Inclusive Multicast Ethernet Tag a tutti gli altri PE nell'istanza EVPN. Un PE può annunciare una route Inclusive Multicast Ethernet Tag per dominio di broadcast nell'istanza EVPN, o una singola route Inclusive Multicast Ethernet Tag per l'intera istanza EVPN. Nel primo caso, il PE annuncia una route Inclusive Multicast Ethernet Tag per ogni dominio di broadcast associato all'istanza EVPN. L'Ethernet Tag ID è impostato su un valore che identifica quel dominio di broadcast (ad esempio, l'ID VLAN per i servizi basati su VLAN). Nel secondo caso, il PE annuncia una singola route Inclusive Multicast Ethernet Tag per tutti i domini di broadcast associati all'istanza EVPN. In questo caso, l'Ethernet Tag ID è impostato a zero.
La route Inclusive Multicast Ethernet Tag è identificata dai campi RD, Ethernet Tag ID e Originating Router's IP Address. L'Originating Router's IP Address DEVE essere impostato sull'indirizzo IP del PE che annuncia.
La route Inclusive Multicast Ethernet Tag DEVE includere l'attributo Provider Multicast Service Interface (PMSI, Interfaccia servizio multicast del provider) Tunnel [RFC6514]. Il Tunnel Type dell'attributo PMSI Tunnel è impostato sul tipo di tunnel utilizzato. Il Tunnel Identifier è impostato per identificare in modo univoco il tunnel. Questo documento descrive i seguenti due tipi di tunnel:
-
Ingress Replication: Il Tunnel Type è impostato su Ingress Replication e il Tunnel Identifier è impostato sull'indirizzo del router del PE che annuncia.
-
P2MP MPLS LSP: Il Tunnel Type è impostato su P2MP e il Tunnel Identifier è impostato su un valore che identifica il P2MP LSP.