5.44 Table of Attributes

5.44. Table of Attributes

The following table provides a guide to which attributes may be found in which kinds of packets, and in what quantity.

Request Accept Reject Challenge # Attribute 0-1 0-1 0 0 1 User-Name 0-1 0 0 0 2 User-Password [Note 1] 0-1 0 0 0 3 CHAP-Password [Note 1] 0-1 0 0 0 4 NAS-IP-Address [Note 2] 0-1 0 0 0 5 NAS-Port 0-1 0-1 0 0 6 Service-Type 0-1 0-1 0 0 7 Framed-Protocol 0-1 0-1 0 0 8 Framed-IP-Address 0-1 0-1 0 0 9 Framed-IP-Netmask 0 0-1 0 0 10 Framed-Routing 0 0+ 0 0 11 Filter-Id 0-1 0-1 0 0 12 Framed-MTU 0+ 0+ 0 0 13 Framed-Compression 0+ 0+ 0 0 14 Login-IP-Host 0 0-1 0 0 15 Login-Service 0 0-1 0 0 16 Login-TCP-Port 0 0+ 0+ 0+ 18 Reply-Message 0-1 0-1 0 0 19 Callback-Number 0 0-1 0 0 20 Callback-Id 0 0+ 0 0 22 Framed-Route 0 0-1 0 0 23 Framed-IPX-Network 0-1 0-1 0 0-1 24 State [Note 1] 0 0+ 0 0 25 Class 0+ 0+ 0 0+ 26 Vendor-Specific 0 0-1 0 0-1 27 Session-Timeout 0 0-1 0 0-1 28 Idle-Timeout 0 0-1 0 0 29 Termination-Action 0-1 0 0 0 30 Called-Station-Id 0-1 0 0 0 31 Calling-Station-Id 0-1 0 0 0 32 NAS-Identifier [Note 2] 0+ 0+ 0+ 0+ 33 Proxy-State 0-1 0-1 0 0 34 Login-LAT-Service 0-1 0-1 0 0 35 Login-LAT-Node

0-1 0-1 0 0 36 Login-LAT-Group 0 0-1 0 0 37 Framed-AppleTalk-Link 0 0+ 0 0 38 Framed-AppleTalk-Network 0 0-1 0 0 39 Framed-AppleTalk-Zone 0-1 0 0 0 60 CHAP-Challenge 0-1 0 0 0 61 NAS-Port-Type 0-1 0-1 0 0 62 Port-Limit 0-1 0-1 0 0 63 Login-LAT-Port Request Accept Reject Challenge # Attribute

[Note 1] An Access-Request MUST contain either a User-Password or a CHAP-Password or State. An Access-Request MUST NOT contain both a User-Password and a CHAP-Password. If future extensions allow other kinds of authentication information to be conveyed, the attribute for that can be used in an Access-Request instead of User-Password or CHAP-Password.

[Note 2] An Access-Request MUST contain either a NAS-IP-Address or a NAS-Identifier (or both).

The following table defines the meaning of the above table entries.

0 This attribute MUST NOT be present in packet. 0+ Zero or more instances of this attribute MAY be present in packet. 0-1 Zero or one instance of this attribute MAY be present in packet. 1 Exactly one instance of this attribute MUST be present in packet.